Tips on how to connect O-ring Chains Remarks to connect general O-ring Chains

one.A connecting website link of an O-ring Chain for common application is pre-coated with grease with the pins. Prior to connection, verify the grease on the surfaces of pins, and in case the quantity of grease is little, apply grease with bare hands. (If gloves are used, the grease is going to be absorbed from the gloves.)
Illustration: When the connecting website link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted with the roots of the pins. If the O-rings come loose as a result of vibration through transport, refit the O-rings in to your roots of the pins.
In this case, be sure to return the grease collected on the roots of your pins towards the central surfaces with the pins, more at portion A than at portions B proven from the above illustration. (Portions A is worn as a result of sliding with all the bushings.)
two.The chain might be most very easily connected within the teeth of the sprocket. Engage the links at both ends in the chain with all the sprocket teeth and match connecting pins. In the event the sprocket is usually moved, the chain can also be connected to the loosened side.
3. Connecting process
one.Confirm that O-rings are attached on the roots of your pins.
2.In case the quantity of grease applied about the connecting pins is small, coat the pins with grease at the central portions.
three.Insert the connecting pins into the bushings on the inner hyperlinks at each ends.
four.Confirm the grease is applied to your total face on the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and while pressing the connecting plate, install the spring clip. Verify whether the head (the finish without a split) on the spring clip is turned inside the feeding course of the chain. (See the next illustration.)
6.Be sure to confirm that the spring clip is securely fitted from the clip grooves of your connecting pins.
This completes jointing of your connecting website link. Note that grease over the surfaces of connecting pins and O-rings could be eliminated for the duration of installation perform. In this case, re-grease working with the grease over the surface of your base chain or even the grease within the polyethylene bag during which the connecting hyperlink was contained.

Company Video

Our Service
1. Installation & adjustment
After the equipment are arrived at the customer’s site, the customer is responsible for unpacking and arranging the equipment according to the placement drawing; and does under our install-adjust technicians’ guidance. Costs of the staff are decided at last.
2. Training
1)  We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users’technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance.
2)  The buyer can send staff to our company for learning.
3. Quality assurance
1)  We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipment is consonance with the contract.
2)  We guarantee the line achieve product technical performance indicators within 5 days after feeding operation through the correct guidance of the installation and commissioning.
3)  We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc. that all belong to our responsibility.
4)  The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer’s factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.

Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.