Single China in Lipetsk Russian Federation bowex m24 coupling near me Shaft in West Rand South Africa fenner grid coupling near me Plastic HDPE Pipe Shredder with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Single Shaft Plastic HDPE Pipe Shredder

Descriptions

The DGS General Purpose Single Shaft Shredder has a 457mm diameter profiled rotor made of solid steel, operating at a speed of 74rpm. The concave ground, aggressive 4-way rotating knives are mounted in the grooves of the profiled rotor with special knife holders. This enables a reduction of the cutting gap between the counter knives and the rotor which guarantees a high flow rate, low power consumption and maximum output of shredded material.

The hydraulically operated ram feeds the material automatically in the rotor’s cutting chamber by load-related controls. The hydraulic system is equipped with high-pressure valves and volumetric flow controls which can be set according to the requirements of the input material.

Extremely robust pedestal bearing housings are mounted outside the machine and separate to the cutting chamber to prevent dust and dirt penetrating into the oversized bearings. This ensures a long service life and minimum service and maintenance.

Power is transmitted from the motor by a drive belt via an oversized gearbox which is located on the shaft end on one end of the rotor.

A safety switch prevents machine startup when the front panel is open and the machine features emergency stop buttons on the machine body and control panel.

Specificatoins

Layout

Features

Large diameter flat rotor
Machined pocket knife holders
Optional hard facing – Concave ground square knives
Robust ram construction
Heavy duty guide bearings
Universal couplings
Low speed, high torque geared drive
Reduced footprint (compared to horizontal pusher designs)
Powerful hydraulic swing type ram
Bolt in drive shafts
Oil cooling on ram and gearbox
Two speed hydraulic system
Multiple rotor designs
Ram comb plate
Amp meter control

Options

Hydraulic screen cradle
Gearbox with shrink disc
Rotor cooling
Pipe spacer
Touch screen PLC Hopper mounted viewing mirror
Increased motor drive
Hydraulic drive

Applitions

PLASTICS
RUBBER
WOOD
BIOMASS
PAPER
ALTERNATIVE FUELS (RDF/SRF)
DOMESTIC & COMMERCIAL WASTE

Factory
Since its foundation DGM Recycling Systems have been at the forefront of innovation and EPT in the development of cost effective and reliable recycling solutions. As a wholly owned subsidiary of Miracle Automation Engineering Group, a pioneer in automation systems for the automotive and material handling industries, DGM continues to strive for excellence in the field of size reduction and recycling.

Suppliers

Certificates
All of our shredders and granulators have been approved CE certification.

Packaging & Loading

1. Several layers of plastic wrapping film and cardboard to protect plastic recycling machine from dust and moisture.

2. Plastic packing strap belt to fasten wrapping film and machines, also to fix machines in containers.

3. Wooden case is used as the outside package and spare parts when choosing by LCL, air or international express.

4. Excellant logistic team to guarantee the shredder and granulators machines to be safely shipped to customer appointed loaction.

5. If you have any other request for the packaging or loading, we will try our best to meet your demands.

FAQ

Q1: Are you a trading company or a factory ?
DGM is a factory with 10 years experience in machinery manufacturing, and 20 years experience in technology.

Q2: Will you provide pre-sale services?
DGM consists of experienced specialists, we will offer a suitable solution according client’s requirement in time.

Q3: Is your after-sales service excellent?
At DGM we have a highly trained team of service personnel to handle all manner of customer service enquiries. Whether it is EPT parts, technical assistance, or just general operation advice we offer our customers genuine 24/7 support and after sale service.

We have an international network which ensures wherever you are in the world you receive localized high level support.

Our technical team has decades of experience in the field of size reduction and recycling and we are on hand to offer assistance in installation, commissioning, staff training and general technical assistance.

Q4: Where is your factory?
Address: No.1.Fengqi Road, Xihu (West Lake) Dis. District , HangZhou City, ZheJiang Province, China

Q5: what is your contact informatoin?
Fax: 0086-571-88220971: +86 510 8357 5710
Telephone: +86 510 8357 2002
Mobile : +86 18762812155

Q6: Could we visit your factory and test the machine?
We warmly welcome you to visit our factory anytime,and we are very glad to test our machine with your raw material.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

Company Video

Our Service
1. Installation & adjustment
After the equipment are arrived at the customer’s site, the customer is responsible for unpacking and arranging the equipment according to the placement drawing; and does under our install-adjust technicians’ guidance. Costs of the staff are decided at last.
2. Training
1) We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users’technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance.
2) The buyer can send staff to our company for learning.
3. Quality assurance
1) We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipment is consonance with the contract.
2) We guarantee the line achieve product technical performance indicators within 5 days after feeding operation through the correct guidance of the installation and commissioning.
3) We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc. that all belong to our responsibility.
4) The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer’s factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.

Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.