SAE Pneumatic Safety Nylon Quick Connector Fitting for Auto Parts

Model NO. TB-17-12×1.5 Trademark Expectations Transportation Package deal 100PCS/Bag Specification seven.89 Origin Zhejiang China HS Code 39174000

Solution Description

SAE pneumatic protection nylon swift connector fitting for automobile partsPRODUCTION Display

Organization SCOPE

Quick connector

Gasoline pipeline assembly

Urea pipeline assembly/SCR Adblue tube assembly

Pipeline finish plug &amp car plastic parts

INTRODUCTION OF Quick CONNECTOR

1) the design and productionInnovative, secure and swift, Our quick connect fittings produced of synthetic material are appropriate for most media carrying traces. Be it gasoline , oil vapor , water cooling and air carrying strains . We offer the thought implies of connection. These swift connectors are specifically suited to becoming matched up with the automotive pipe method.The design and production of rapid connector are strictly accord with SAE J2044-2009. Fast link coupling specification for liquid gasoline and vapor or emissions methods . If the solution does not meet up with consumer needs, we can design and style and manufacture in accordance to buyers requirements. Plug-in and sel-locking composition permits connect and disconnect a lot more swift and easier. The place required for the operation is only the width of a finger on both sides. These features ensure more quickly connector can be high-density arrangement and an improve in client style adaptability.

2) Safety of quick connectorQuick connector with double sealing rings radial sealing framework, modified rubber o-rings employed, largely for fluid The physics chemistry, custom, anti-aging, corrosion, and swelling outer o-rings are divided by the intermediate spacer ring. Corresponding room on the two sealing ring, rubber substrate bonding does not take place, the outer synthetic rubber o-rings used, Enhanced mechanical properties. avoiding air aging. Sealing ring and spacer ring via the outer ring of elastic clamping gadget securely mounted in Shell will not result in phenomena these kinds of as ring falls of, and change. Fantastic seal safety is confirmed.three)MaterialOf Fast Connector

PartsMaterialSupplierApplicationBodyPA12 GF30ARKEMAEVONIKFuelPA66 GF30/35BASFDUPONTFuel SteamPA6/6T GF25BASFHT FuelPA9T GF30KURARAYHT FuelLocking SpringPA11ARKEMAFuelPA66BASFDUPONTFuel, SteamSecuring RingPA12 GF30ARKEMAEVONIKFuel,Steam,Urea,A/C , Electrical power Steering SystemPA6/6T GF30BASFHT FuelPA66GF 30/35BASFFuel SteamO RingFKM/FVMQ/HNBR/AEMHUTCHINS ONGMORSFuel,Steam,Urea,A/C Power Steering Technique

four)Working setting of rapid connectorGasoline and diesel gas shipping methods , Ethanol , methanol or organic fuel supply techniques or their vapor venting or evaporative emission handle systems

Operating pressure5bar (72psi)Operating pressurein Vacuum-.55bar (-7.2psi)Functioning temperature-forty-one hundred fifteen&ordmC, quick time 150&ordmC

5)Link &ampdisconnect peration technique of swift connectorQuick connector is made up of body , in o-ring , out o-ring , spacer ring , securing ring and locking spring . When a mating tube conclude piece inserts the connector , as locking spring has specified elasticity , Tie clip fastener to join two connectors together ,and then pull back to guarantee comprehensive relationship.Repair or get rid of the quick connector is difference . 1st progress press the male connector and press the clip button , lock expansion , you can effortlessly pull out the connectorplease note,SAE 30th hefty oil lubrication ought to be utilized just before ReseatThe Action of inserts the connector The Step of inserts the connector

Basic Data.

Design NO. TB-seventeen-12×1.5 Trademark Requirements Transportation Bundle 100PCS/Bag Specification 7.89 Origin Zhejiang China HS Code 39174000

Solution Description

Consumer Question &amp Solution Ask one thing for much more specifics ()

SAE pneumatic protection nylon fast connector fitting for auto partsPRODUCTION Show

Enterprise SCOPE

Rapid connector

Fuel pipeline assembly

Urea pipeline assembly/SCR Adblue tube assembly

Pipeline stop plug &amp car plastic components

INTRODUCTION OF Quick CONNECTOR

1) the design and productionInnovative, secure and quick, Our quick link fittings manufactured of artificial substance are suited for most media carrying lines. Be it gas , oil vapor , water cooling and air carrying lines . We offer the idea means of relationship. These swift connectors are specially suited to getting matched up with the automotive pipe technique.The layout and generation of rapid connector are strictly accord with SAE J2044-2009. Fast connect coupling specification for liquid gas and vapor or emissions systems . If the solution does not fulfill buyer needs, we can style and manufacture in accordance to consumers demands. Plug-in and sel-locking composition enables link and disconnect more rapid and simpler. The space required for the procedure is only the width of a finger on both sides. These features make sure a lot quicker connector can be higher-density arrangement and an enhance in customer design and style adaptability.

2) Security of quick connectorQuick connector with double sealing rings radial sealing construction, modified rubber o-rings utilized, mainly for fluid The physics chemistry, customized, anti-getting older, corrosion, and swelling outer o-rings are divided by the intermediate spacer ring. Corresponding area on the two sealing ring, rubber substrate bonding does not take place, the outer synthetic rubber o-rings utilised, Elevated mechanical houses. protecting against air aging. Sealing ring and spacer ring by way of the outer ring of elastic clamping gadget securely fastened in Shell will not outcome in phenomena such as ring falls of, and shift. Great seal security is assured.three)MaterialOf Quick Connector

PartsMaterialSupplierApplicationBodyPA12 GF30ARKEMAEVONIKFuelPA66 GF30/35BASFDUPONTFuel SteamPA6/6T GF25BASFHT FuelPA9T GF30KURARAYHT FuelLocking SpringPA11ARKEMAFuelPA66BASFDUPONTFuel, SteamSecuring RingPA12 GF30ARKEMAEVONIKFuel,Steam,Urea,A/C , Energy Steering SystemPA6/6T GF30BASFHT FuelPA66GF thirty/35BASFFuel SteamO RingFKM/FVMQ/HNBR/AEMHUTCHINS ONGMORSFuel,Steam,Urea,A/C Electricity Steering Program

four)Functioning surroundings of swift connectorGasoline and diesel fuel supply systems , Ethanol , methanol or natural gas shipping methods or their vapor venting or evaporative emission management systems

Working pressure5bar (72psi)Doing work pressurein Vacuum-.55bar (-seven.2psi)Doing work temperature-40-one hundred fifteen&ordmC, short time one hundred fifty&ordmC

five)Link &ampdisconnect peration method of rapid connectorQuick connector is created up of physique , in o-ring , out o-ring , spacer ring , securing ring and locking spring . When a mating tube stop piece inserts the connector , as locking spring has specified elasticity , Tie clip fastener to hook up two connectors with each other ,and then pull again to assure total relationship.Fix or remove the rapid connector is variation . very first advance press the male connector and push the clip button , lock expansion , you can easily pull out the connectorplease notice,SAE thirtieth hefty oil lubrication ought to be used ahead of ReseatThe Phase of inserts the connector The Phase of inserts the connector

Company Video

Our Service
1. Installation & adjustment
After the equipment are arrived at the customer’s site, the customer is responsible for unpacking and arranging the equipment according to the placement drawing; and does under our install-adjust technicians’ guidance. Costs of the staff are decided at last.
2. Training
1)  We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users’technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance.
2)  The buyer can send staff to our company for learning.
3. Quality assurance
1)  We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipment is consonance with the contract.
2)  We guarantee the line achieve product technical performance indicators within 5 days after feeding operation through the correct guidance of the installation and commissioning.
3)  We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc. that all belong to our responsibility.
4)  The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer’s factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.

Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.


Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.