DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
This power unit has a energy up power down circuit with load holding on both A & B ports. A stress compensatred flow control may be extra to circuit to manage the decent pace on the cylinder.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned before installation of the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and totally free of impurities. N46 hydraulic oil is advisable.
four. The energy unit really should be mounted horizontally.
5. Check the oil level while in the tank soon after the original running of the electrical power unit.
six. Oil altering is required just after the original a hundred operation hours, afterwards as soon as each 3000 hours.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This power unit features a electrical power up gravity down circuit. Begin the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve may be supplied if needed. Also a strain compen sated flow management is often additional towards the circuit to regulate the descent pace from the cylinder.
Remark: Please seek advice from our product sales engineer for your distinct pump displacement, motor power or tank capacity.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean each of the hydraulic components concerned prior to set up of the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which need to also be clean and cost-free of impurities.N46 hydraulic oil is proposed.
four. The electrical power unit need to be mounted horizontally.
five. Check the oil level inside the tank right after the original working of the energy unit.
6. Oil shifting is required immediately after the original 100 operation hours, afterwards once every single 3000 hrs.