The smallest chain complying to ANSI is 25 of 6.35 mm pitch. Nonetheless, in response to your demands for smaller sized chains lately for higher technologies machinery such as office gear, medical machines and industrial robots, we deliver 15 of 4.7625 mm (3/16 inch) pitch as well as 15H1 as a high-power model of 15. These high precision chains are manufactured below severe good quality control in particular necessary for tiny sizes, taking wear resistance also into consideration.
Choice of chain
Refer towards the “Low-speed selection”. Nonetheless, the chain operation velocity could be set significantly high based upon the kind of lubrication as proven in the table below.
Connecting back links and offset hyperlinks
R connecting links are used for modest pitch chains. Nonetheless, because their strength is reduced than that in the base chain, and because the clip is prone to come off in substantial velocity operation, using connecting links is not advised. Use a loop chain without the need of attaching connecting back links.
Offset links are available for chains other than 15 and 15H1, but their use will not be recommended for your very same reason as stated for the R Connecting back links.
Operating pace and form of lubrication
15: A large precision mini-pitch bushing chain that is definitely smaller than a compact drive chain for common applications, 25
25: Smallest bushing chain amongst ANSI conventional chains utilizing curl bushings.
35: A ANSI regular bushing chain appropriate for modest precision machines that demand higher 
power.
Compact Pitch Chain
Company Video
1. Installation & adjustment
After the equipment are arrived at the customer’s site, the customer is responsible for unpacking and arranging the equipment according to the placement drawing; and does under our install-adjust technicians’ guidance. Costs of the staff are decided at last.
2. Training
1) We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users’technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance.
2) The buyer can send staff to our company for learning.
3. Quality assurance
1) We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipment is consonance with the contract.
2) We guarantee the line achieve product technical performance indicators within 5 days after feeding operation through the correct guidance of the installation and commissioning.
3) We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc. that all belong to our responsibility.
4) The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer’s factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.
Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.
With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.
Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.
FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.
Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.
Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.
Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.
