Product Description
Densen Customized Scraper hydraulic coupling,pressure relief type hydraulic coupling,torque limiting fluid coupling
Product Name | Scraper hydraulic coupling,pressure relief type hydraulic coupling,torque limiting fluid coupling |
DN mm | 16~190mm |
Rated Torque | 40~25000 N·m |
Allowable speed | 4500~200 kN·m |
Material | 45#steel,aluminum |
Application | Widely used in metallurgy, mining, engineering and other fields. |
Product show
Company Information
Equipment
Application Case
Typical case of diaphragm coupling applied to variable frequency speed control equipment
JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant
According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.
It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.
Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.
Other Application Case
Spare parts
Packaging & Shipping
Contact us
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Are there specific torque and speed limits for different fluid drive coupling designs?
Yes, different fluid drive coupling designs have specific torque and speed limits that determine their suitable applications and performance capabilities. These limits are influenced by the coupling’s design, construction, and the type of hydraulic fluid used. Here are the key factors that contribute to torque and speed limits in fluid drive couplings:
- Coupling Size and Design: The physical size and design of the fluid drive coupling play a significant role in determining its torque capacity. Larger couplings with robust construction can generally handle higher torque loads than smaller couplings.
- Hydraulic Fluid Type: The type and viscosity of the hydraulic fluid used in the coupling affect its torque transmission capabilities. Different fluid types may have varying coefficients of friction, which impact the torque capacity of the coupling.
- Fluid Fill Level: The amount of hydraulic fluid filled in the coupling can influence its torque capacity. Proper fluid fill levels are essential for optimal coupling performance and torque transmission.
- Speed Range: The speed range of a fluid drive coupling is determined by its design and the hydraulic fluid’s properties. Some couplings may have limitations at high rotational speeds due to centrifugal forces and fluid dynamics.
- Operating Temperature: The operating temperature of the fluid drive coupling affects the hydraulic fluid’s viscosity, which in turn impacts the coupling’s torque transmission efficiency and overall performance.
- Application Specifics: The specific application requirements, such as load variations, start-up conditions, and duty cycles, also influence the torque and speed limits of the fluid drive coupling.
Manufacturers provide torque and speed ratings in their coupling specifications to guide users in selecting the appropriate coupling for a particular application. These ratings indicate the maximum torque and rotational speed that the coupling can handle safely and effectively without risking damage or performance issues.
It is essential to carefully match the torque and speed requirements of the power transmission system with the fluid drive coupling’s torque and speed limits. Operating the coupling within its specified limits ensures optimal performance, extended service life, and enhanced safety of the power transmission system.
If the application demands higher torque or speed capabilities than a standard fluid drive coupling can provide, it is advisable to consult with coupling manufacturers or fluid power engineers to explore custom-designed or specialized couplings that can meet the specific requirements.
How Fluid Drive Couplings Ensure Efficient Power Transmission and Smooth Operation
Fluid drive couplings, also known as hydraulic couplings or fluid couplings, are designed to facilitate efficient power transmission and ensure smooth operation in various industrial applications. Here’s how they achieve these objectives:
- Fluid Medium: Fluid drive couplings contain a fluid medium, typically hydraulic oil, inside a sealed chamber. When the driving shaft rotates, it imparts motion to the fluid.
- Centrifugal Action: As the fluid is set in motion by the driving shaft, it creates a centrifugal force that causes the fluid to move outward towards the housing walls.
- Torque Transmission: The moving fluid then comes in contact with the blades or vanes attached to the driven shaft. This interaction transmits torque from the driving shaft to the driven shaft, allowing power transmission.
- Smooth Start: During startup, the fluid coupling provides a controlled, gradual acceleration to the driven shaft. This soft start minimizes shock loads on the connected equipment, reducing wear and tear and preventing damage to the system.
- Torque Converter: In some applications, fluid drive couplings function as torque converters, especially in automatic transmissions. They enable efficient power transfer in a wide range of speeds, allowing the engine to operate efficiently at various load conditions.
- Torsional Vibration Damping: Fluid drive couplings act as torsional vibration dampers, absorbing vibrations and shocks caused by sudden changes in load or speed. This feature protects the connected equipment and improves overall system reliability.
- Overload Protection: Fluid drive couplings offer overload protection by slipping when the load exceeds a certain threshold. This prevents mechanical damage and helps safeguard the system from sudden shocks or blockages.
- Energy Efficiency: By providing a soft start and minimizing power loss during transmission, fluid drive couplings contribute to energy efficiency in various applications.
Overall, fluid drive couplings play a crucial role in ensuring efficient power transmission, protecting equipment from damage, and enabling smooth operation in a wide range of industrial processes.
What are the different types of fluid drive couplings used in various industrial applications?
Fluid drive couplings come in various types, each designed to suit specific industrial applications and power transmission requirements. Here are some of the different types of fluid drive couplings commonly used in various industries:
- Constant-Fill Fluid Couplings: Constant-fill fluid couplings have a fixed amount of hydraulic fluid inside the casing. These couplings offer smooth acceleration and deceleration and provide torque amplification during start-up. They are often used in applications requiring consistent speed regulation and overload protection, such as conveyor systems and crushers.
- Variable-Fill Fluid Couplings: Variable-fill fluid couplings allow manual adjustment of the hydraulic fluid level within the casing. By changing the fill level, the coupling can vary the amount of slip between the driving and driven shafts, enabling precise control over the output speed. These couplings are suitable for applications that require speed control, such as mixers, agitators, and cooling tower fans.
- Delayed-Fill Fluid Couplings: Delayed-fill fluid couplings have a time-delayed filling mechanism that controls the fluid transfer between the driving and driven impellers. They are used in applications where a gradual start-up is necessary to reduce shock loads, such as in large centrifugal pumps and compressors.
- Hydrodynamic Torque Converters: Hydrodynamic torque converters are a type of fluid coupling with an additional stator element. The stator redirects the fluid flow, improving the efficiency of power transmission and providing a higher torque output. These couplings are commonly used in automotive applications, such as automatic transmissions in vehicles.
- Magnetic Fluid Couplings: Magnetic fluid couplings use magnetic fields to transfer torque without physical contact between the driving and driven impellers. These couplings offer a hermetically sealed design, making them suitable for applications where preventing fluid leakage is critical, such as in pumps and marine propulsion systems.
- Constant-Fill Fluid Couplings with Lock-Up: These couplings combine the characteristics of a constant-fill fluid coupling with the ability to lock-up the driving and driven impellers, creating a solid mechanical connection when required. They are commonly used in industrial drivetrains to improve overall efficiency and reduce energy losses.
- Fluid Couplings with Integrated Clutches: These couplings incorporate both the hydrodynamic power transmission of fluid couplings and the clutching action of mechanical clutches. They provide smooth start-up and can handle high torque loads, making them suitable for heavy-duty applications like metal forming presses and mining equipment.
Each type of fluid drive coupling offers unique advantages and is selected based on the specific requirements of the industrial application. When choosing a fluid drive coupling, factors such as torque capacity, speed range, slip control, and efficiency should be carefully considered to ensure optimal performance and reliability in the intended application.
It’s crucial to consult with experienced fluid power engineers or coupling manufacturers to determine the most suitable type of fluid drive coupling for a particular industrial application. Proper selection and installation of the right fluid drive coupling can significantly enhance the efficiency, safety, and longevity of the machinery or equipment.
editor by CX 2024-02-11