We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For a lot more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Plum Elastic Coupling(GB/T5272-2002)
Plum elastic coupling has the attributes of vibration reduction, buffering, small radial size, no lubrication and straightforward servicing. Ideal for starting frequency, optimistic and adverse rotation, medium and lower speed, medium and modest energy transmission.Not ideal for large hundreds and frequent substitute of elastic factors.
The composition of plum elastic coupling is easy.But when the elastic element is replaced, the half coupling shall be moved axially.LMS sort is effortless to replace the elastic aspect without having possessing to shift the 50 percent coupling.
Basic Parameter And Major Dimension(GB/T5014-200three)
Type | Nominal torque(Tn/N·m) | Speed(Np) | Shaft hole diameter (d1,d2,dz) |
Length of shaft gap | LO | D | Done | Type of elastic parts | Mass | Rotary inertia | ||||||||||||||
Hardness of elastic parts | LM | LMD,LMS | Y sort | J1,Z kind | L (suggest) |
LM | LMD | LMS | LMD,LMS | LM | LMD | LMS | LM | LMD | LMS | |||||||||
a/HA | b/High definition | L | ||||||||||||||||||||||
eighty+five | 60+five | r·min-one | Mm | kg | kg·m2 | |||||||||||||||||||
LM1 LMD1 LMS1 |
25 | 45 | 15300 | 8500 | twelve,fourteen | 32 | 27 | 35 | 86 | 92 | 98 | 50 | 90 | MT1-a -b | 0.66 | 1.21 | 1.33 | 0.0002 | 0.0008 | 0.0013 | ||||
sixteen,eighteen,19 | forty two | thirty | ||||||||||||||||||||||
twenty,22,24 | 52 | 38 | ||||||||||||||||||||||
twenty five | sixty two | 44 | ||||||||||||||||||||||
LM2 LMD2 LMS2 |
50 | 100 | 1200 | 7600 | sixteen,eighteen,19 | 42 | thirty | 38 | 95 | 101.five | 108 | 60 | 100 | MT2-a -b | 0.93 | 1.sixty five | 1.74 | 0.0004 | 0.0014 | 0.0571 | ||||
twenty,22,24 | 52 | 38 | ||||||||||||||||||||||
twenty five,28 | sixty two | forty four | ||||||||||||||||||||||
thirty | eighty two | sixty | ||||||||||||||||||||||
LM3 LMD3 LMS3 |
100 | 200 | 10900 |
6900 | twenty,22,24 | 52 | 38 | 40 | 103 | 110 | 117 | 70 | 110 | MT3-a -b | 1.41 | 2.36 | 2.33 | 0.0009 | 0.0571 | 0.0034 | ||||
twenty five,28 | 62 | 44 | ||||||||||||||||||||||
30,32 | eighty two | 60 | ||||||||||||||||||||||
LM4 LMD4 LMS4 |
140 | 280 | 9000 |
6200 | 22,24 | fifty two | 38 | 45 | 114 | 122 | 130 | 85 | 125 | MT4-a -b | 2.18 | 3.fifty six | 3.38 | 0.002 | 0.005 | 0.0064 | ||||
twenty five,28 | 62 | forty four | ||||||||||||||||||||||
30,32,35,38 | eighty two | 60 | ||||||||||||||||||||||
forty | 112 | 84 | ||||||||||||||||||||||
LM5 LMD5 LMS5 |
350 | 400 | 7300 |
5000 | 25,28 | 62 | forty four | 50 | 127 | 138.5 | 150 | 105 | 150 | MT5-a -b | 3.sixty | 6.36 | 6.07 | 0.005 | 0.0135 | 0.0175 | ||||
thirty,32,35,38 | 82 | sixty | ||||||||||||||||||||||
40,forty two,forty five | 112 | eighty four | ||||||||||||||||||||||
LM6 LMD6 LMS6 |
400 | 710 | 6100 |
4100 | thirty,32,35,38 | eighty two | sixty | 55 | 143 | 155 | 167 | 185 | 185 | MT6-a -b | 6.07 | 10.77 | 10.47 | 0.0114 | 0.0329 | 0.0444 | ||||
forty,42,forty five,forty eight | 112 | 84 | ||||||||||||||||||||||
LM7 LMD7 LMS7 |
630 | 1120 | 5300 | 3700 | 35*,38* | eighty two | sixty | 60 | 159 | 172 | 185 | 205 | 205 | MT7-a -b | 9.09 | 15.thirty | 14.22 | 0.5712 | 0.0581 | 0.571 | ||||
forty*,forty two*,45,forty eight,fifty,55 | 112 | 84 | ||||||||||||||||||||||
LM8 LMD8 LMS8 |
1120 | 2240 | 4500 | 3100 | forty five*,48*,fifty,fifty five,fifty six | 112 | eighty four | 70 | 181 | 195 | 209 | 170 | 240 | MT8-a -b | 13.fifty six | 22.seventy two | 21.sixteen | 0. 0571 | 0.1175 | 0.1493 | ||||
60,63,65 | 142 | 107 | ||||||||||||||||||||||
LM9 LMD9 LMS9 |
1800 | 3550 | 3800 | 2800 | 50*,fifty five*,fifty six* | 112 | eighty four | 80 | 208 | 224 | 240 | 200 | 270 | MT9-a -b | 21.forty | 34.forty four | 30.70 | 0.1041 | 0.2333 | 0.2767 | ||||
sixty,sixty three,sixty five,70,seventy one,75 | 142 | 107 | ||||||||||||||||||||||
eighty | 172 | 132 | ||||||||||||||||||||||
LM10 LMD10 LMS10 |
2800 | 5600 | 3300 | 2500 | 60*,sixty three*,65*,70,71,75 | 142 | 107 | 90 | 230 | 248 | 268 | 230 | 305 | MT10-a -b | 32.03 | 51.36 | 44.fifty five | 0.2105 | 0.4594 | 0.5262 | ||||
80,85,ninety,ninety five | 172 | 132 | ||||||||||||||||||||||
a hundred | 212 | 167 | ||||||||||||||||||||||
LM11 LMD11 LMS11 |
4500 | 9000 | 2900 | 2200 | seventy one*,seventy one*,seventy five* | 142 | 107 | 100 | 260 | 284 | 308 | 260 | 350 | MT11-a -b | 49.fifty two | 81.thirty | 70.72 | 0.4338 | 0.9777 | 1.1362 | ||||
80*,85*,ninety,95 | 172 | 132 | ||||||||||||||||||||||
100,110,a hundred and twenty | 212 | 167 | ||||||||||||||||||||||
LM12 LMD12 LMS12 |
6300 | 12500 | 2500 | 1900 | 80*,eighty five*,90*95 | 172 | 132 | 115 | 297 | 321 | 345 | 300 | 400 | MT12-a -b | 73.45 | 115.fifty three | 99.fifty four | 0.8205 | 1.751 | 1.9998 | ||||
a hundred,one hundred ten,120,one hundred twenty five | 212 | 167 | ||||||||||||||||||||||
130,140,one hundred fifty | 252 | 202 | ||||||||||||||||||||||
LM13 LMD13 LMS13 |
11200 | 2000 | 2100 | 1600 | 90*,95* | 172 | 132 | 125 | 323 | 348 | 373 | 360 | 460 | MT13-a -b | 103.86 | 161.seventy nine | 137.fifty three | 1.6718 | 3.667 | 3.6719 | ||||
a hundred*,one hundred ten*,one hundred twenty*,a hundred twenty five* | 212 | 167 | ||||||||||||||||||||||
one hundred thirty,140,one hundred fifty | 252 | 202 | ||||||||||||||||||||||
LM14 LMD14 LMS14 |
12500 | 25000 | 1900 | 1500 | one hundred*,110*,a hundred and twenty*,a hundred twenty five* | 212 | 167 | 135 | 333 | 358 | 383 | 400 | 500 | MT14-a -b | 127.fifty nine | 196.32 | 165.25 | 2.499 | 4.8669 | 5.1581 | ||||
a hundred thirty*,140*,one hundred fifty | 252 | 202 | ||||||||||||||||||||||
a hundred and sixty | 302 | 242 |
Observe:
1.Mass and rotary inertia are the approximation calculated according to the advisable minimum axial hole.
two.Diameter of shaft hole with* can be used for Z sort shaft gap.
3.a.b is the code for two diverse materia EPT and hardness of elastic components.
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 diverse branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic products manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our business and the outlined substitute areas contained herein are not sponsored, accredited, or created by the OEM.