Product Description
Hot sale: low noise,no leakage, no additional cost for motor shaft coupling magnetic clutch magnetic pump
Introduction of motor shaft coupling magnetic clutch magnetic pump
Magnetic shaft coupling is a new kind of coupling, which connects motor and machine by permanent magnetic force.
They are consisted of external rotor, internal rotor and isolating covers.
They work in the sealed magnetic drive pumps, which transporting volatile, flammable, explosive and toxic solutions with no leakage.
These magnetic shaft couplings can be used to connect gear pumps , screw pumps, centrifugal pumps, etc. with all types of electric motor or gear box.
Magnetic shaft coupling are widely used in various industries and fields, such as chemical, papermaking, foodstuff, pharmacy, and so on.
Advantages of motor shaft coupling magnetic clutch magnetic pump
» Elimination of fluid leakage from the pump shaft.
» Vibrations are not transmitted to the pump.
» No maintenance required for magnetic couplings.
» Using magnetic couplings allows use of standard pumps without expensive mechanical seals.
» No additional cost for purchasing mechanical seal spare parts and maintenance.
Technical drawing of motor shaft coupling magnetic clutch magnetic pump
Specification of motor shaft coupling magnetic clutch magnetic pump
Item | Internal Rotor(mm) | External Rotor(mm) | Isolating Covering(mm) | |||||||||||||||||
A | B | C | D | E | F | G | Shaft Pin | H | I | J | L | N | M | P | Q | R | S | T | U | |
GME03-3LM00 | Φ35 | – | Φ10 | 26 | – | 18 | – | M6X12 | Φ42 | Φ60 | Φ50 | 46 | 6-M4 | Φ40 | Φ50 | 4-Φ5.4 | Φ38 | Φ60 | 6 | 6 |
GME03-5MM00 | Φ42 | – | Φ12 | 27 | 4 | 18 | 13.8 | M6X16 | Φ49 | Φ72 | Φ60 | 46 | 4-Φ6.7 | Φ52 | Φ60 | 4-Φ6.7 | Φ44 | Φ74 | 8 | 8 |
GME03-16LM00 | Φ56 | – | Φ12 | 45 | 4 | 25 | 13.8 | M6X16 | Φ63 | Φ89 | Φ80 | 75 | 6-M5 | Φ70 | Φ75 | 4-Φ6.7 | Φ58 | Φ89 | 8 | 8 |
GME03-16LM01 | Φ56 | – | Φ12 | 45 | 4 | 25 | 13.8 | M6X16 | Φ63 | Φ89 | Φ80 | 75 | 4-M5 | Φ70 | Φ75 | 4-Φ6.7 | Φ58 | Φ89 | 6 | 10 |
GME03-16MM00 | Φ56 | – | Φ12 | 45 | 4 | 25 | 13.8 | M6X16 | Φ63 | Φ89 | Φ80 | 75 | 6-M5 | Φ70 | Φ75 | 4-Φ6.7 | Φ58 | Φ89 | 8 | 8 |
GME03-22LM00 | Φ88 | – | Φ20 | 29 | 6 | 25 | 22.8 | M8X20 | Φ97 | Φ122 | Φ110 | 70 | 8-M6 | Φ98 | Φ108 | 6-Φ6.7 | Φ91 | Φ122 | 8 | 8 |
GME03-30LM00 | Φ88 | – | Φ20 | 48 | 6 | 30 | 22.8 | M8X20 | Φ97 | Φ122 | Φ110 | 81 | 8-M6 | Φ98 | Φ108 | 6-Φ6.7 | Φ91 | Φ122 | 8 | 8 |
GME03-40LM00 | Φ101 | – | Φ25 | 49 | 8 | 28 | 28.3 | M10X20 | Φ109 | Φ140 | Φ124 | 83 | 8-M8 | Φ110 | Φ126 | 8-Φ6.7 | Φ103 | Φ140 | 12 | 6 |
GME03-50LM00 | Φ107 | – | Φ20 | 70 | 6 | 30 | 22.8 | M6X16 | Φ113.4 | Φ145 | Φ135 | 80 | 4-M6 | Φ126 | Φ133 | 12-Φ8.7 | Φ109 | Φ153 | 12 | 15 |
GME03-65LM00 | Φ101 | – | Φ25 | 77 | 8 | 45 | 28.3 | M10X20 | Φ109 | Φ140 | Φ124 | 111 | 8-M8 | Φ110 | Φ126 | 8-Φ6.7 | Φ103 | Φ140 | 12 | 6 |
GME03-80LM00 | Φ106 | – | Φ32 | 65 | 10 | 21 | 36.5 | M6X25 | Φ115 | Φ145 | Φ135 | 82 | 4-M6 | Φ127 | Φ135 | 6-Φ8.7 | Φ110 | Φ153 | 13 | 18 |
GME03-80LM00 | Φ141 | Φ92 | Φ40 | 65 | 12 | 45 | 43.3 | M12X25 | Φ152 | Φ180 | Φ168 | 100 | 8-M8 | Φ154 | Φ164 | 8-Φ6.7 | Φ145 | Φ180 | 12 | 8 |
GME03-100LM00 | Φ131 | Φ82 | Φ32 | 80 | 10 | 24.5 | 35.3 | M8X35 | Φ139 | Φ170 | Φ160 | 100 | 4-M6 | Φ152 | Φ158 | 8-Φ8.7 | Φ133 | Φ178 | 14 | 21 |
GME03-110LH00 | Φ141 | Φ92 | Φ40 | 85 | 10 | 50 | 43.3 | M12X25 | Φ152 | Φ184 | Φ168 | 115 | 12-M8 | Φ156 | Φ164 | 12-Φ6.7 | Φ145 | Φ180 | 12 | 3 |
GME03-110LM00 | Φ141 | Φ92 | Φ35 | 80 | 10 | 55 | 38.3 | M12X25 | Φ152 | Φ180 | Φ168 | 115 | 12-M8 | Φ154 | Φ164 | 12-Φ6.7 | Φ145 | Φ180 | 12 | 3 |
GME03-140LM00 | Φ141 | Φ92 | Φ40 | 110 | 12 | 80 | 43.3 | M12X25 | Φ152 | Φ190 | Φ170 | 145 | 12-M10 | Φ154 | Φ164 | 12-Φ6.7 | Φ145 | Φ180 | 12 | 3 |
GME03-180LM00 | Φ141 | Φ92 | Φ40 | 140 | 12 | 95 | 43.3 | M12X25 | Φ152 | Φ190 | Φ170 | 175 | 12-M10 | Φ154 | Φ164 | 12-Φ6.7 | Φ145 | Φ180 | 12 | 3 |
GME03-220LM00 | Φ141 | Φ92 | Φ48 | 160 | 14 | 110 | 51.8 | M12X25 | Φ152 | Φ190 | Φ170 | 195 | 12-M10 | Φ154 | Φ164 | 12-Φ6.7 | Φ145 | Φ180 | 12 | 3 |
GME03-300LM00 | Φ162 | – | Φ65 | 100 | 18 | 60 | 69.4 | Φ170 | Φ198 | Φ188 | 123 | 12-M6 | Φ180 | Φ192 | 12-Φ11 | Φ163.5 | Φ218 | 16 | 10 | |
GME03-400LH00 | Φ195 | – | Φ70 | 127 | 20 | 107 | 79.9 | M12X25 | Φ203 | Φ234 | Φ222 | 152 | 6-M6 | Φ212 | Φ164 | 12-Φ11 | Φ198 | Φ278 | 16 | 22 |
Application of motor shaft coupling magnetic clutch magnetic pump
The ability to hermetically separate 2 areas whilst continuing to transmit mechanical power from one to the other makes these couplings ideal for applications where prevention of cross contamination is essential. For instance: hydraulic sectors, dosing systems, compressors, sterilizers, industrial ovens, biotechnology, subsea equipment, pharmaceutical industry, chemical industry, food industry, generators and mixers.
Operation principles of motor shaft coupling magnetic clutch magnetic pump
The magnetic coupling works by using the power generated by permanent magnets. No external power supply is needed. These are permanent magnets not electro magnets.
Packing Method of motor shaft coupling magnetic clutch magnetic pump
Double strength corrugated Carton and Wood case Sea Packing.
GME core values
Quality is our life. Customer satisfaction is our CHINAMFG pursuit. Everything we do at CHINAMFG is driven by an unyielding passion for CHINAMFG in identifying and delivering solutions that exceed expectations.
In today’s fast-developing global economy, innovation is critical to a company’s survival. We anticipate and adapt to changing for continuous improvement.
A business cannot be successful unless it creates prosperity and opportunity for others. We have a dream–customers could win more through our Great Service; we have a dream–GME members could realize their own dreams while striving for CHINAMFG Dream.
Sustainability isn’t only important for people and the planet, but also is vital for business success. We are environmentally responsible and drive to sustainability. And we should do something for our better future.
For more information, please refer to greatmagtech or greatmagtech directly.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
What are the maintenance requirements for fluid drive couplings to ensure optimal performance?
Proper maintenance is crucial to ensure the optimal performance and extended service life of fluid drive couplings. Regular maintenance practices help identify and address potential issues early, preventing costly breakdowns and ensuring the efficiency of power transmission systems. The maintenance requirements for fluid drive couplings include:
- Fluid Level Check: Regularly check the hydraulic fluid level in the coupling. Ensure that the fluid level is within the manufacturer’s recommended range. Low fluid levels can lead to decreased torque transmission and affect the coupling’s performance.
- Fluid Quality: Monitor the condition of the hydraulic fluid regularly. Contaminated or degraded fluid can adversely impact the coupling’s performance. Replace the fluid as per the manufacturer’s guidelines or if signs of contamination are observed.
- Seals and Gaskets: Inspect the seals and gaskets for signs of wear, leaks, or damage. Faulty seals can lead to fluid leakage, reducing the coupling’s efficiency and potentially causing damage to other components in the system.
- Alignment Check: Periodically check the alignment of the driving and driven shafts. Misalignment can result in increased wear and reduced performance of the fluid drive coupling. Proper alignment ensures optimal torque transmission and prevents premature failure.
- Overload Protection: Test the slip mechanism to ensure it is functioning correctly. The slip mechanism should engage during overload conditions to protect the coupling and connected machinery from excessive stresses.
- Coupling Bolts: Inspect and tighten the coupling bolts as per the manufacturer’s recommendations. Loose bolts can result in misalignment and reduced coupling efficiency.
- Lubrication: Some fluid drive couplings may have specific lubrication requirements. Follow the manufacturer’s guidelines for lubricating the coupling components, if applicable.
- Temperature Monitoring: Monitor the operating temperature of the fluid drive coupling. Excessive heat can impact the hydraulic fluid’s viscosity and degrade the coupling’s performance.
- Periodic Inspection: Conduct regular visual and functional inspections of the fluid drive coupling. Look for any signs of abnormal wear, damage, or unusual noises during operation.
It is essential to refer to the manufacturer’s maintenance guidelines and recommendations specific to the fluid drive coupling model. Adhering to the prescribed maintenance schedule and procedures ensures that the coupling remains in optimal condition and delivers reliable performance over its operational life.
By following these maintenance practices, users can minimize downtime, avoid costly repairs, and ensure the fluid drive coupling continues to contribute to the efficient and safe operation of the power transmission system.
Can fluid drive couplings be used in applications requiring continuous variable speed control?
Yes, fluid drive couplings can be used in applications requiring continuous variable speed control. The unique design and operating principle of fluid drive couplings allow them to provide smooth and precise speed regulation over a wide range of operating speeds.
Fluid drive couplings utilize a hydrodynamic torque transmission mechanism, where the amount of torque transmitted between the driving and driven elements is determined by the amount of fluid present in the coupling’s working chamber. By adjusting the fluid level, the coupling’s output speed can be continuously varied.
The fluid level in the coupling can be controlled manually, automatically, or electronically, depending on the specific application requirements. Here are some methods used to achieve continuous variable speed control with fluid drive couplings:
- Manual Adjustment: In some applications, the fluid level in the coupling can be adjusted manually by operators. By changing the fluid level, the speed of the driven element can be continuously controlled, providing versatility in the system’s operation.
- Hydraulic Control: Certain fluid drive couplings incorporate hydraulic control systems to adjust the fluid level automatically. These control systems respond to changes in the driving element’s speed or load and modulate the fluid level to maintain the desired speed at the driven element.
- Electrical Control: Advanced fluid drive couplings can be equipped with electrical control systems that use sensors and feedback loops to precisely regulate the fluid level. This enables accurate and automated speed control based on the system’s requirements.
Continuous variable speed control offered by fluid drive couplings is advantageous in various applications, including conveyor systems, industrial mixers, pump drives, and certain types of marine propulsion. The ability to smoothly adjust the speed helps optimize energy consumption, reduce wear and tear on equipment, and enhance overall process efficiency.
Additionally, fluid drive couplings provide overload protection, which is crucial in applications requiring variable speed control. When the system experiences sudden load fluctuations or overloads, the fluid drive coupling can slip to protect the connected machinery from damage.
It is important to select the appropriate fluid drive coupling model with the required variable speed control capabilities based on the specific application’s speed range, torque demands, and control requirements. Working closely with the coupling manufacturer and understanding the system’s operating conditions will ensure the optimal coupling is chosen to achieve smooth and efficient variable speed control.
How do you select the right fluid drive coupling for specific machinery or equipment?
Selecting the right fluid drive coupling is crucial to ensure optimal performance, efficiency, and reliability of machinery or equipment in various industrial applications. The selection process involves considering several factors to match the coupling’s characteristics with the specific requirements of the application. Here are the steps to guide you in selecting the appropriate fluid drive coupling:
- Identify Application Requirements: Understand the operational requirements of the machinery or equipment. Determine the torque and speed range, the need for speed regulation, and any specific start-up conditions or load variations.
- Type of Fluid Drive Coupling: Based on the application requirements, choose the appropriate type of fluid drive coupling. Consider constant-fill couplings for consistent speed regulation, variable-fill couplings for adjustable speed control, and delayed-fill couplings for gradual start-ups.
- Power Rating: Determine the power rating required for the machinery or equipment. Ensure the selected fluid drive coupling can handle the expected torque and power levels without exceeding its capacity.
- Speed Range: Check the speed range capability of the fluid drive coupling. It should match the operating speeds of the machinery to provide the desired performance during both low and high-speed operations.
- Slip Control: Evaluate the need for slip control in the application. Some applications may require slip to protect against sudden overloads or to provide controlled acceleration.
- Overload Protection: If overload protection is essential for the machinery or equipment, ensure the selected coupling can handle transient loads without damage.
- Fluid Compatibility: Consider the compatibility of the hydraulic fluid with the application’s operating conditions. The fluid should have suitable viscosity and temperature characteristics for efficient power transmission and to avoid fluid breakdown.
- Environmental Conditions: Evaluate the environmental conditions, such as temperature, humidity, and the presence of contaminants, to ensure the fluid drive coupling can operate reliably under such conditions.
- Space Constraints: Check the available space for coupling installation. Some fluid drive couplings may have specific space requirements that need to be accommodated.
- Budget and Cost: Consider the budget constraints and balance them with the performance requirements. Choose a fluid drive coupling that offers the best value for money without compromising on critical features.
It’s essential to work closely with experienced fluid power engineers, coupling manufacturers, or suppliers during the selection process. They can provide valuable insights and assistance in choosing the most suitable fluid drive coupling for the specific machinery or equipment application.
Additionally, consulting the coupling manufacturer’s technical specifications, performance data, and application guidelines will further aid in making an informed decision. Regular maintenance and monitoring of the fluid drive coupling’s performance are vital to ensure it continues to function optimally and extends the machinery or equipment’s lifespan.
In summary, selecting the right fluid drive coupling involves a comprehensive analysis of the machinery’s requirements, coupling characteristics, and operational conditions. By considering these factors and seeking professional advice, you can make an informed choice that enhances the efficiency and reliability of your machinery or equipment.
editor by CX 2024-03-13