Centrifugal Horizontal Ultra Chrome alloy AH EPT EPT
Introduction:
one. HS sequence slurry pump is made for the constant pumping of high abrasive, EPT slurries with nominal maintenance specifications. The sporting areas are produced of extremely chrome or and rubber. It will sustain substantial efficiency over the wear lifestyle of its factors.
two. The metallic damp components and rubber types can be interchangeable for dealing with distinct liquids or slurries.
3. HS slurry pumps are offered in sizes ranging from one inch to 18 inch discharge and characteristic higher effectiveness functionality capable of movement rates from ten.8 to 5400 m sup3/h and heads up to 125 meters for substantial head models.
Features:
one. Cylindrical composition of bearing assembly: handy to alter the place amongst impeller and JCEP liner
and can beremoved entirely
2. Interchangeable anti-abrasive damp areas made of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs give large running pressure abilities
and an additional measure of basic safety.
4. The discharge branch can be oriEPTTd to any eigEPTT positions at the interval of 45 degrees
5. Different EPT varieties: DC(direct connection), V-belt EPT, EPT box EPTT, EPT couplings, VFD,
SCR handle, and so forth
six. The shaft seal employs the EPTT seal, expeller seal and mechanical seal
Normal Software:
#8226 Mineral processing | #8226 EPT | #8226 EPTT Washery | #8226 Cyclone feeds |
#8226 Bentonite | #8226 EPTT slurry | #8226 EPTEPTTng | #8226 Mill grinding |
#8226 Ash hXiHu (West EPT) Dis.Hu (West EPT) Dis. | #8226 Tunnel | #8226 Squander sludge | #8226 Coarse sand |
#8226 Lime mud | #8226 Phosphoric acid | #8226 EPTT | #8226 EPTT |
#8226 Alumina JCEP | #8226 EPTT Plant | #8226 Potash FerEPTTzer Plant | #8226 Other EPTT |
#8226 Iron ore sand | #8226 JCEP Focus | #8226 EPT EPT | #8226Molybdenum |
Product | Max EPTT (Kw) |
Inlet amp Outlet measurement (inch) | EPT for Wear Elements | Movement Price (Q) | EPT (H) meter |
Velocity (RPM) |
EPTTeller Dia. (mm) |
|
m sup3/hr | l/s | |||||||
25HS-B | 15 | one.five/one | M | 12.six~28.8 | three.5~eight | six~sixty eight | 1200~3800 | 152 |
R | ten.eight~25.two | 3~7 | 7~52 | 1400~3400 | 152 | |||
40HS-B | fifteen | two/1.five | M | 32.four~72 | nine~20 | 6~58 | 1200~3200 | 184 |
R | twenty five.two~fifty four | seven~fifteen | five.5~forty one | a thousand~2600 | 178 | |||
50HS-C | 30 | three/two | M | 39.six~86.4 | 11~24 | 12~64 | 1300~2700 | 214 |
R | 36~75.6 | ten~21 | thirteen~forty six | 1300~2300 | 213 | |||
75HS-C | thirty | four/three | M | 86.4~198 | 24~fifty five | 9~fifty two | one thousand~2200 | 245 |
R | seventy nine.2~one hundred eighty | 22~fifty | five~34.5 | 800~1800 | 245 | |||
100HS-D | sixty | 6/4 | M | 162~360 | 40~a hundred | twelve~fifty six | 800~1550 | 365 |
R | 144~324 | 40~90 | twelve~45 | 800~1350 | 365 | |||
150HS-E | one hundred twenty | eight/six | M | 360~828 | 100~230 | 10~sixty one | five hundred~1140 | 510 |
R | 324~720 | 90~200 | seven~forty nine | four hundred~one thousand | 510 | |||
200MS-E | 120 | 10/8 | M | 666~1440 | 185~four hundred | 14~60 | 600~1100 | 549 |
200HS-ST | 560 | 10/eight | M | 612~1368 | 170~380 | 11~61 | 400~850 | 686 |
R | 540~1188 | a hundred and fifty~330 | twelve~50 | four hundred~750 | 686 | |||
250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
R | 720~1620 | two hundred~450 | seven~45 | three hundred~650 | 762 | |||
300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
R | 1152~2520 | 320~700 | thirteen~44 | three hundred~500 | 965 | |||
350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | seven-hundred~1500 | thirteen~fifty seven | two hundred~four hundred | 1370 |
25HHS-C | thirty | 1.five/1 | M | 16.two~34.2 | four.5~nine.5 | twenty five~92 | 1400~2200 | 330 |
50HHS-D | 60 | 3/two | M | sixty eight.four~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
75HHS-E | one hundred twenty | four/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
100HHS-E | one hundred twenty | six/4 | M | 324~720 | ninety~two hundred | thirty~118 | 600~one thousand | 711 |
150HHS-S | 560 | 8/six | M | 468-1008 | 130~280 | twenty~94 | 500~1000 | 711 |
For the substance of putting on components,
quotM quot = steel, extremely chromium alloy quotR quot = anti-abrasive rubber
Contact
Welcome to contact us any time for details.
Your inquiry will get our prompt focus and response !