Materials Managing Electrical power UNIT two
This energy unit functions power up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the lowering speed managed through the strain compensated flow control valve. Items of this series could be broadly utilized in the field of logistic units for instance fork lift, mini lift table, etc.
one. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean each of the hydraulic elements concerned just before mounting the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which really should also be clean and free of impurities, N46 hydraulic oil is advised .
4. Oil modifying is needed immediately after the preliminary one hundred operation hours,afterwards when each and every 3000 hrs.
5. The power unit ought to be mounted horizontally.
Material Handling Power UNIT one
This power unit is made for that fork lift field, consisting of highly efficient gear pump, DC motor, manual raise and reduced valve, tank, ect. The up and down motion are managed from the lever of the manual release valve, which can be equipped with an electric switch to activate the motor. The lowing pace is controlled by the pressure compensated movement management valve.
1. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean all of the hydraulic parts concerned before set up of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which need to also be clean and totally free of impurities, N46 hydraulic oil is advisable .
4. Oil modifying is needed soon after the original 100 operation hours, afterwards when each and every 3000 hrs.
5. The power unit proven is intended to be mounted horizontally.