China Carbon Steel Straight SAE Hydraulic Coupling energy coupling

Solution Description

carbon steel straight sae hydraulic coupling

Specification:


 

PART NO.  
THREAD E
HOSE BORE DIMENSIONS
DN Sprint A C S2
27811-04-03 seven/16″X20 five 03 fourteen 9 fifteen
27811-04-04 seven/16″X20 6 04 fifteen nine fifteen
27811-05-05 one/2″X20 8 05 15.five nine.5 seventeen
27811-06-04 five/8″X18 six 04 seventeen 11.3 22
27811-06-05 five/8″X18 8 05 seventeen 11.three 22
27811-06-06 5/8″X18 ten 06 17 eleven.3 22
27811-08-08 three/4″X16 12 08 18 eleven 24
27811-ten-08 7/8″X14 12 08 eighteen.5 thirteen 27
27811-ten-ten seven/8″X14 sixteen ten 20 thirteen 27
27811-twelve-12 1.1/16″X14 twenty 12 21.5 fourteen.3 32

The substance  are constantly carbon steel, stainless steel or brass, and the content can be customized.

The surface of the ferrules are smooth, zinc plating or other people custom-made.

Attributes:
Higher performance
Precise design
Sturdy

Carbon substance:

Plant:

Warehouse:

Other goods:

Swaged Metric Fittings Mertic Flat Seal Fittings 
Metric Multiseal Fittings
Metric 60°Cone Seal Fittings 
Metric 74°Cone Seal Fittings
Metric 24°Cone O-RING Seal L..T Fittings
Metric 24°Cone O-RING Seal H.T.Fittings
Metric Standpipe Straight Fittings
JIS Metric 60°Cone Seal Fitting
Swaged British Fittings BSP O-RING Seal Fittings 
BSP Flat Seal Fittings
BSP Multiseal Fittings
BSP 60°Cone Seal Fittings
BSPT Fittings
JIS BSP 60°Cone Seal Fittings
Swaged American Fittings SAE O-RING Seal Fittings 
ORFS Flat Seal Fittings
NPSM 60°Cone Seal Fittings
JIC 74°Cone Seal Fittings
NPT Fittings SAE Flange L.T. Fittiings
SAE Flange H.T.Fittings
Staplelok Fittings Banjo Double connection 
interlock Hose Fittings
Ferrule FERRULE for SAE100R1AT/ EN 853 1SN HOSE
FERRULE for SAE100R1A EN 853 1ST HOSE
FERRULE for SAE100R2AT/DIN20571 2SN HOSE
FERRULE for SAE100R2A/EN 853 2SN HOSE
FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC
FERRULE for 4SP,4SH/ten-sixteen,R12-06-16 HOSE
FERRULE for 4SH,R12/32 HOSE
Metric Adapters Metric Thread O-RING Face Seal Adapters
Metric Thread Bite Kind Tube Adapters
JIS Metric Thread 60°Cone Adapters
Metric Thread 74°Cone Flared Tube Adapters
British Adapters BSP Thread 60°Cone Adapters
JIS BSP Thread 60°Cone Adapters
BSPT Thread Adapters
American Adapters ORFS Adapters JIC 74°Cone Flared Tube Adapters
NPT Thread Adapters

We carries a vast variety of hydraulic hose ferrule fittings in typical dimensions,utilised mostly for crimping hose fittings.A lot more other type ferrule,fitting and hose make sure you truly feel cost-free to speak to with us.

Standard: DIN
Material: Low Carbon Steel
Connection: Crimping Fitting
Surface Treatment: Zinc Plated
Head Type: Hexagon
Technics: by CNC Machine

###

Samples:
US$ 0.5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

PART NO.  
THREAD E
HOSE BORE DIMENSIONS
DN DASH A C S2
27811-04-03 7/16"X20 5 03 14 9 15
27811-04-04 7/16"X20 6 04 15 9 15
27811-05-05 1/2"X20 8 05 15.5 9.5 17
27811-06-04 5/8"X18 6 04 17 11.3 22
27811-06-05 5/8"X18 8 05 17 11.3 22
27811-06-06 5/8"X18 10 06 17 11.3 22
27811-08-08 3/4"X16 12 08 18 11 24
27811-10-08 7/8"X14 12 08 18.5 13 27
27811-10-10 7/8"X14 16 10 20 13 27
27811-12-12 1.1/16"X14 20 12 21.5 14.3 32

###

Swaged Metric Fittings Mertic Flat Seal Fittings 
Metric Multiseal Fittings
Metric 60°Cone Seal Fittings 
Metric 74°Cone Seal Fittings
Metric 24°Cone O-RING Seal L..T Fittings
Metric 24°Cone O-RING Seal H.T.Fittings
Metric Standpipe Straight Fittings
JIS Metric 60°Cone Seal Fitting
Swaged British Fittings BSP O-RING Seal Fittings 
BSP Flat Seal Fittings
BSP Multiseal Fittings
BSP 60°Cone Seal Fittings
BSPT Fittings
JIS BSP 60°Cone Seal Fittings
Swaged American Fittings SAE O-RING Seal Fittings 
ORFS Flat Seal Fittings
NPSM 60°Cone Seal Fittings
JIC 74°Cone Seal Fittings
NPT Fittings SAE Flange L.T. Fittiings
SAE Flange H.T.Fittings
Staplelok Fittings Banjo Double connection 
interlock Hose Fittings
Ferrule FERRULE for SAE100R1AT/ EN 853 1SN HOSE
FERRULE for SAE100R1A EN 853 1ST HOSE
FERRULE for SAE100R2AT/DIN20022 2SN HOSE
FERRULE for SAE100R2A/EN 853 2SN HOSE
FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC
FERRULE for 4SP,4SH/10-16,R12-06-16 HOSE
FERRULE for 4SH,R12/32 HOSE
Metric Adapters Metric Thread O-RING Face Seal Adapters
Metric Thread Bite Type Tube Adapters
JIS Metric Thread 60°Cone Adapters
Metric Thread 74°Cone Flared Tube Adapters
British Adapters BSP Thread 60°Cone Adapters
JIS BSP Thread 60°Cone Adapters
BSPT Thread Adapters
American Adapters ORFS Adapters JIC 74°Cone Flared Tube Adapters
NPT Thread Adapters
Standard: DIN
Material: Low Carbon Steel
Connection: Crimping Fitting
Surface Treatment: Zinc Plated
Head Type: Hexagon
Technics: by CNC Machine

###

Samples:
US$ 0.5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

PART NO.  
THREAD E
HOSE BORE DIMENSIONS
DN DASH A C S2
27811-04-03 7/16"X20 5 03 14 9 15
27811-04-04 7/16"X20 6 04 15 9 15
27811-05-05 1/2"X20 8 05 15.5 9.5 17
27811-06-04 5/8"X18 6 04 17 11.3 22
27811-06-05 5/8"X18 8 05 17 11.3 22
27811-06-06 5/8"X18 10 06 17 11.3 22
27811-08-08 3/4"X16 12 08 18 11 24
27811-10-08 7/8"X14 12 08 18.5 13 27
27811-10-10 7/8"X14 16 10 20 13 27
27811-12-12 1.1/16"X14 20 12 21.5 14.3 32

###

Swaged Metric Fittings Mertic Flat Seal Fittings 
Metric Multiseal Fittings
Metric 60°Cone Seal Fittings 
Metric 74°Cone Seal Fittings
Metric 24°Cone O-RING Seal L..T Fittings
Metric 24°Cone O-RING Seal H.T.Fittings
Metric Standpipe Straight Fittings
JIS Metric 60°Cone Seal Fitting
Swaged British Fittings BSP O-RING Seal Fittings 
BSP Flat Seal Fittings
BSP Multiseal Fittings
BSP 60°Cone Seal Fittings
BSPT Fittings
JIS BSP 60°Cone Seal Fittings
Swaged American Fittings SAE O-RING Seal Fittings 
ORFS Flat Seal Fittings
NPSM 60°Cone Seal Fittings
JIC 74°Cone Seal Fittings
NPT Fittings SAE Flange L.T. Fittiings
SAE Flange H.T.Fittings
Staplelok Fittings Banjo Double connection 
interlock Hose Fittings
Ferrule FERRULE for SAE100R1AT/ EN 853 1SN HOSE
FERRULE for SAE100R1A EN 853 1ST HOSE
FERRULE for SAE100R2AT/DIN20022 2SN HOSE
FERRULE for SAE100R2A/EN 853 2SN HOSE
FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC
FERRULE for 4SP,4SH/10-16,R12-06-16 HOSE
FERRULE for 4SH,R12/32 HOSE
Metric Adapters Metric Thread O-RING Face Seal Adapters
Metric Thread Bite Type Tube Adapters
JIS Metric Thread 60°Cone Adapters
Metric Thread 74°Cone Flared Tube Adapters
British Adapters BSP Thread 60°Cone Adapters
JIS BSP Thread 60°Cone Adapters
BSPT Thread Adapters
American Adapters ORFS Adapters JIC 74°Cone Flared Tube Adapters
NPT Thread Adapters

What Is a Coupling?

A coupling is a mechanical device that links two shafts together and transmits power. Its purpose is to join rotating equipment while permitting a small amount of misalignment or end movement. Couplings come in a variety of different types and are used in a variety of applications. They can be used in hydraulics, pneumatics, and many other industries.
gearbox

Types

Coupling is a term used to describe a relationship between different modules. When a module depends on another, it can have different types of coupling. Common coupling occurs when modules share certain overall constraints. When this type of coupling occurs, any changes to the common constraint will also affect the other modules. Common coupling has its advantages and disadvantages. It is difficult to maintain and provides less control over the modules than other types of coupling.
There are many types of coupling, including meshing tooth couplings, pin and bush couplings, and spline couplings. It is important to choose the right coupling type for your specific application to get maximum uptime and long-term reliability. Listed below are the differences between these coupling types.
Rigid couplings have no flexibility, and require good alignment of the shafts and support bearings. They are often used in applications where high torque is required, such as in push-pull machines. These couplings are also useful in applications where the shafts are firmly attached to one another.
Another type of coupling is the split muff coupling. This type is made of cast iron and has two threaded holes. The coupling halves are attached with bolts or studs.
gearbox

Applications

The coupling function is an incredibly versatile mathematical tool that can be used in many different scientific domains. These applications range from physics and mathematics to biology, chemistry, cardio-respiratory physiology, climate science, and electrical engineering. The coupling function can also help to predict the transition from one state to another, as well as describing the functional contributions of subsystems in the system. In some cases, it can even be used to reveal the mechanisms that underlie the functionality of interactions.
The coupling selection process begins with considering the intended use of the coupling. The application parameters must be determined, as well as the operating conditions. For example, if the coupling is required to be used for power transmission, the design engineer should consider how easily the coupling can be installed and serviced. This step is vital because improper installation can result in a more severe misalignment than is specified. Additionally, the coupling must be inspected regularly to ensure that the design parameters remain consistent and that no detrimental factors develop.
Choosing the right coupling for your application is an important process, but it need not be difficult. To find the right coupling, you must consider the type of machine and environment, as well as the torque, rpm, and inertia of the system. By answering these questions, you will be able to select the best coupling for your specific application.
gearbox

Problems

A coupling is a device that connects two rotating shafts to transfer torque and rotary motion. To achieve optimal performance, a coupling must be designed for the application requirements it serves. These requirements include service, environmental, and use parameters. Otherwise, it can prematurely fail, causing inconvenience and financial loss.
In order to prevent premature failure, couplings should be properly installed and maintained. A good practice is to refer to the specifications provided by the manufacturer. Moreover, it is important to perform periodic tests to evaluate the effectiveness of the coupling. The testing of couplings should be performed by qualified personnel.
China Carbon Steel Straight SAE Hydraulic Coupling     energy couplingChina Carbon Steel Straight SAE Hydraulic Coupling     energy coupling
editor by czh 2023-01-05

Company Video

Our Service
1. Installation & adjustment
After the equipment are arrived at the customer’s site, the customer is responsible for unpacking and arranging the equipment according to the placement drawing; and does under our install-adjust technicians’ guidance. Costs of the staff are decided at last.
2. Training
1)  We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users’technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance.
2)  The buyer can send staff to our company for learning.
3. Quality assurance
1)  We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipment is consonance with the contract.
2)  We guarantee the line achieve product technical performance indicators within 5 days after feeding operation through the correct guidance of the installation and commissioning.
3)  We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc. that all belong to our responsibility.
4)  The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer’s factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.

Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.


Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.