Auto SAE J2044 Quick Coupling Connect Fuel Pipe Assembly

Product NO. TB-RN-011 Trademark Requirements Transport Package 100PCS/Bag Specification seven.89 Origin Zhejiang China HS Code 39174000

Merchandise Description

Car SAE J2044 rapid coupling join fuel pipe assemblyPRODUCTION Display

Company SCOPE

Rapid connector

Fuel pipeline assembly

Urea pipeline assembly/SCR Adblue tube assembly

Pipeline finish plug &amp vehicle plastic areas

INTRODUCTION OF Swift CONNECTOR

1) the design and style and productionInnovative, safe and quick, Our quick hook up fittings made of artificial material are suited for most media carrying strains. Be it gasoline , oil vapor , water cooling and air carrying lines . We offer you the concept implies of relationship. These rapid connectors are specially suited to becoming matched up with the automotive pipe method.The design and style and creation of fast connector are strictly accord with SAE J2044-2009. Quick hook up coupling specification for liquid gas and vapor or emissions methods . If the solution does not meet buyer requirements, we can layout and manufacture in accordance to customers specifications. Plug-in and sel-locking framework enables connect and disconnect far more rapid and less complicated. The space required for the operation is only the width of a finger on equally sides. These functions make sure faster connector can be higher-density arrangement and an improve in customer layout adaptability.

two) Stability of swift connectorQuick connector with double sealing rings radial sealing framework, modified rubber o-rings utilised, largely for fluid The physics chemistry, custom made, anti-getting older, corrosion, and swelling outer o-rings are separated by the intermediate spacer ring. Corresponding area on the two sealing ring, rubber substrate bonding does not occur, the outer synthetic rubber o-rings utilised, Enhanced mechanical properties. stopping air aging. Sealing ring and spacer ring through the outer ring of elastic clamping device securely fastened in Shell will not outcome in phenomena these kinds of as ring falls of, and change. Great seal stability is confirmed.3)MaterialOf Rapid Connector

PartsMaterialSupplierApplicationBodyPA12 GF30ARKEMAEVONIKFuelPA66 GF30/35BASFDUPONTFuel SteamPA6/6T GF25BASFHT FuelPA9T GF30KURARAYHT FuelLocking SpringPA11ARKEMAFuelPA66BASFDUPONTFuel, SteamSecuring RingPA12 GF30ARKEMAEVONIKFuel,Steam,Urea,A/C , Power Steering SystemPA6/6T GF30BASFHT FuelPA66GF 30/35BASFFuel SteamO RingFKM/FVMQ/HNBR/AEMHUTCHINS ONGMORSFuel,Steam,Urea,A/C Power Steering Technique

four)Functioning atmosphere of fast connectorGasoline and diesel gas supply systems , Ethanol , methanol or all-natural gas shipping and delivery methods or their vapor venting or evaporative emission management programs

Doing work pressure5bar (72psi)Working pressurein Vacuum-.55bar (-7.2psi)Doing work temperature-forty-a hundred and fifteen&ordmC, quick time a hundred and fifty&ordmC

5)Link &ampdisconnect peration approach of rapid connectorQuick connector is produced up of entire body , in o-ring , out o-ring , spacer ring , securing ring and locking spring . When a mating tube finish piece inserts the connector , as locking spring has specific elasticity , Tie clip fastener to hook up two connectors jointly ,and then pull back to assure complete link.Fix or remove the rapid connector is distinction . first progress drive the male connector and push the clip button , lock enlargement , you can effortlessly pull out the connectorplease be aware,SAE thirtieth large oil lubrication need to be utilized prior to ReseatThe Action of inserts the connector The Step of inserts the connector

Simple Data.

Model NO. TB-RN-011 Trademark Requirements Transportation Package deal 100PCS/Bag Specification seven.89 Origin Zhejiang China HS Code 39174000

Product Description

Buyer Issue &amp Response Ask one thing for much more information ()

Vehicle SAE J2044 quick coupling hook up gasoline pipe assemblyPRODUCTION Display

Enterprise SCOPE

Quick connector

Gas pipeline assembly

Urea pipeline assembly/SCR Adblue tube assembly

Pipeline stop plug &amp auto plastic components

INTRODUCTION OF Rapid CONNECTOR

1) the layout and productionInnovative, safe and quick, Our quick join fittings created of artificial substance are appropriate for most media carrying traces. Be it fuel , oil vapor , water cooling and air carrying strains . We offer the idea indicates of relationship. These quick connectors are specially suited to becoming matched up with the automotive pipe program.The design and style and generation of fast connector are strictly accord with SAE J2044-2009. Rapid hook up coupling specification for liquid fuel and vapor or emissions methods . If the product does not meet up with client demands, we can layout and manufacture in accordance to buyers requirements. Plug-in and sel-locking construction permits link and disconnect far more fast and less complicated. The area necessary for the procedure is only the width of a finger on equally sides. These functions make sure more quickly connector can be higher-density arrangement and an enhance in customer design versatility.

two) Stability of fast connectorQuick connector with double sealing rings radial sealing construction, modified rubber o-rings used, mainly for fluid The physics chemistry, personalized, anti-growing older, corrosion, and swelling outer o-rings are divided by the intermediate spacer ring. Corresponding area on the two sealing ring, rubber substrate bonding does not occur, the outer artificial rubber o-rings employed, Increased mechanical properties. stopping air aging. Sealing ring and spacer ring by way of the outer ring of elastic clamping unit securely mounted in Shell will not result in phenomena these kinds of as ring falls of, and change. Excellent seal protection is assured.3)MaterialOf Swift Connector

PartsMaterialSupplierApplicationBodyPA12 GF30ARKEMAEVONIKFuelPA66 GF30/35BASFDUPONTFuel SteamPA6/6T GF25BASFHT FuelPA9T GF30KURARAYHT FuelLocking SpringPA11ARKEMAFuelPA66BASFDUPONTFuel, SteamSecuring RingPA12 GF30ARKEMAEVONIKFuel,Steam,Urea,A/C , Power Steering SystemPA6/6T GF30BASFHT FuelPA66GF 30/35BASFFuel SteamO RingFKM/FVMQ/HNBR/AEMHUTCHINS ONGMORSFuel,Steam,Urea,A/C Electrical power Steering Program

4)Doing work atmosphere of swift connectorGasoline and diesel gasoline shipping programs , Ethanol , methanol or organic gas shipping techniques or their vapor venting or evaporative emission handle methods

Operating pressure5bar (72psi)Working pressurein Vacuum-.55bar (-seven.2psi)Functioning temperature-40-one hundred fifteen&ordmC, short time a hundred and fifty&ordmC

five)Hook up &ampdisconnect peration approach of rapid connectorQuick connector is produced up of entire body , in o-ring , out o-ring , spacer ring , securing ring and locking spring . When a mating tube end piece inserts the connector , as locking spring has certain elasticity , Tie clip fastener to join two connectors with each other ,and then pull back to guarantee comprehensive relationship.Repair or get rid of the fast connector is big difference . 1st progress thrust the male connector and press the clip button , lock enlargement , you can easily pull out the connectorplease be aware,SAE 30th weighty oil lubrication should be employed just before ReseatThe Action of inserts the connector The Phase of inserts the connector

Company Video

Our Service
1. Installation & adjustment
After the equipment are arrived at the customer’s site, the customer is responsible for unpacking and arranging the equipment according to the placement drawing; and does under our install-adjust technicians’ guidance. Costs of the staff are decided at last.
2. Training
1)  We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users’technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance.
2)  The buyer can send staff to our company for learning.
3. Quality assurance
1)  We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipment is consonance with the contract.
2)  We guarantee the line achieve product technical performance indicators within 5 days after feeding operation through the correct guidance of the installation and commissioning.
3)  We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc. that all belong to our responsibility.
4)  The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer’s factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.

Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets. Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.


Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.